Through Hard Shoulder

Our through hard shoulder pins are made from H-13 hot work steel with a higher core hardness of 50-55 HRC and surface hardness to 65-74 HRC. Quality is unquestionable as our pins are widely used by injection molding and high pressure die casters throughout North America, including Tier 1 tooling suppliers.

Base P/N	Diameter	Shoulder	Length					Head Dia.	Head Thick
			6"	10"		14"
			STD.	STD.	0.005	STD.	0.005
EJPTHS0031-0500	1/32	1/2	L06					1/4	1/8
EJPTHS0031-2000	1/32	2	L06					1/4	1/8
EJPTHS0031-3000	1/32	3		L10	L105			1/4	1/8
EJPTHS0031-4000	1/32	4		L10	L105			1/4	1/8
EJPTHS0046-0500	3/64	1/2	L06					1/4	1/8
EJPTHS0046-2000	3/64	2	L06	L10	L105			1/4	1/8
EJPTHS0046-3000	3/64	3		L10	L105			1/4	1/8
EJPTHS0046-4000	3/64	4		L10	L105			1/4	1/8
EJPTHS0062-0500	1/16	1/2	L06	L10	L105			1/4	1/8
EJPTHS0062-2000	1/16	2	L06	L10	L105	L14	L145	1/4	1/8
EJPTHS0062-3000	1/16	3		L10	L105			1/4	1/8
EJPTHS0062-4000	1/16	4		L10	L105			1/4	1/8
EJPTHS0078-0500	5/64	1/2	L06	L10	L105			1/4	1/8
EJPTHS0078-2000	5/64	2	L06	L10	L105	L14	L145	1/4	1/8
EJPTHS0078-3000	5/64	3		L10	L105			1/4	1/8
EJPTHS0078-4000	5/64	4		L10	L105			1/4	1/8
EJPTHS0093-0500	3/32	1/2	L06	L10	L105			1/4	1/8
EJPTHS0093-2000	3/32	2	L06	L10	L105	L14	L145	1/4	1/8
EJPTHS0093-3000	3/32	3		L10	L105			1/4	1/8
EJPTHS0093-4000	3/32	4		L10	L105			1/4	1/8
EJPTHS0109-0500	7/64	1/2	L06	L10	L105			1/4	1/8
EJPTHS0109-2000	7/64	2	L06	L10	L105	L14	L145	1/4	1/8
EJPTHS0109-3000	7/64	3		L10	L105			1/4	1/8
EJPTHS0109-4000	7/64	4		L10	L105			1/4	1/8