Metric Shoulder Pins

Our metric shoulder ejection pins are made from H-13 hot work steel with a core hardness of 37-42 HR with nitrided surface to 65-75 HRC. Quality is unquestionable as our pins are widely used by injection molding and high pressure die casters throughout North America, including Tier 1 tooling suppliers.

Base P/N	PIN DIA.	SHOULDER DIA.	LENGTH						HEAD DIA.	HEAD THICK
			80	100	125	160	200	250
			Shoulder=35mm	Shoulder=50mm	Shoulder=50	Shoulder=63mm	Shoulder=80mm	Shoulder=100mm
EJPNMS008-020	0,8	2			L125				4	2
EJPNMS010-020	1,0	2	L080	L100	L125	L160	L200		4	2
EJPNMS011-020	1,1	2			L125				4	2
EJPNMS012-020	1,2	2	L080	L100	L125	L160	L200		4	2
EJPNMS013-020	1,3	2			L125				4	2
EJPNMS014-020	1,4	2			L125				4	2
EJPNMS015-030	1,5	3	L080	L100	L125	L160	L200	L250	6	3
EJPNMS016-030	1,6	3			L125				6	3
EJPNMS017-030	1,7	3	L080			L160			6	3
EJPNMS018-030	1,8	3			L125				6	3
EJPNMS020-030	2,0	3	L080	L100	L125	L160	L200	L250	6	3
EJPNMS022-030	2,2	3	L080			L160			6	3
EJPNMS025-030	2,5	3		L100	L125	L160	L200	L250	6	3
EJPNMS027-030	2,7	3				L160			6	3